Replacing the Window Regulator

A while back I had a little off-track excursion into a tire wall during a track day. The window regulator was damaged in that accident and never replaced. More specifically, the track the window sits in, which is part of the regulator assembly, was bent and kept the window from being able to move smoothly in the track. It also prevented the window from getting all the way to the fully-up position. It would close enough to prevent water from coming in when it rains, but there’d sometimes be a little wind noise from the misalignment and, frankly, it needed to be fixed.

DISCLAIMER: As always, follow all safety protocols. Don't undertake this task if you aren't comfortable with it and fully understand it. You are ultimately responsible for anything you do. Neither Redpants, LLC or myself is responsible or liable for anything that may occur.

Tools for Step 1
About an hour

Step 1
Remove the door panel.